Discover in this new collection of 3D models all the 3D printer files related to calibration and torture test for 3d printers

Here's our selection of the best STL files to perfectly calibrate your 3D printer, all of these super useful and well thought out templates are from the Cults 3D File Library.

There's nothing more frustrating than feeling like you're not getting access to your 3D printer's full potential! This is often due to poor slicer settings or bad calibration of your machine. You have just received your printer, barely assembled or out of the box, and you start 3D printing models that you had put aside for a long time on your Cults account. It's quite normal, you've been waiting for it for so long! But bad surprise, the result is not perfect. This is most probably due to your machine. It is very important to take the time to set it up perfectly before launching into big projects, even if it can take a little time.

Several points can generate problems, for example, a bad calibration of your printing plate, there are 3D models to validate its installation and calibration. It can also be a small problem of adjustment of one of the 3 axes of 3D printing (X, Y and Z). In this case too, there are test 3D files for the axes of your 3D printer.

The slicer settings are also very important, so every time you change the spool, it is important to do a temperature test to get the best out of the filament you are using. In this case, it is important to start printing a "temp tower", this object will allow you to define the best 3D printing temperature for your material (PLA, TPU, ABS ...).

Once all this is perfectly installed and your printer is working perfectly, don't hesitate to share with the designers of the platform your most beautiful 3D prints!