Really Annoying Card Container

The Really Annoying Card Container, the more irritating version of The Annoying Gift Box. Instead of 20 bolts, this one has 134 that have to be removed to get to the contents inside.

It is scaled just about gift-card-size, so you can scale up as you want to fit bigger items.

*11/28/2023: Added 4 new bolt/tool variations.

**These designs are uploaded with a non-commercial license. Purchasing this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D

**These are just the settings I used to test the model, feel free to use whatever settings work best for you.

FDM or Resin: FDM
Scaling: Can be scaled up, bolts likely won't work well if scaled down.
Supports: None
Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts and screwdriver.
Nozzle Size: 0.4
Layer Height: 0.2

No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need to print all of the pieces, plus 134 bolts.

There is no screwdriver included, because find your own. (Ya know, to be more irritating).

*11/28/2023: I have added 4 new bolt/tool variations, you can find them in the .zip file annoying bolt variations.zip.

I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in that orientation.

File List (10):
- bolt (need 134) (STL)
- box_1_container (STL)
- box_1_lid (STL)
- box_2_container (STL)
- box_2_lid (STL)
- box_2_sleeve (STL)
- box_3_bottom (STL)
- box_3_top (STL)
- annoying_box_thread_test (STL)
- annoying_box_screwdriver.stl (Added 3/16/2023)
- annoying bolt variations.zip

Changelog:
11/28/2023: Added 4 new bolt/tool variations: phillips head, 5.5 hex, 6 hex, and security bit