PT-44 R/C MODEL POWERBOAT

Assembly Video 1/3: https://youtu.be/2lOzUJDdRuU
Assembly Video 2/3: https://youtu.be/dGuo2I9-7wI
Assembly Video 3/3: https://youtu.be/NK9bT9q9UnE

3DWW’s first R/C powerboat design PT-44 is inspired by the G-5 Class Torpedo boat used at early 1900’s.Half submarine and half boat like design looks futuristic for a R/C powerboat.This is a semi-scale design that you can improve the appearance of the boat.Boat’s hull lenght is 1100mm and maximum height with antenna tower is 380mm.Total required PLA material is 2kg.
The boat has 2 power options.You can print the twin motor version with 2 electric motors inside and the total power can reach to an amazing 5600Watts or you can print and assemble the single motor version.Inside the product’s ZIP folder you can find both design.
The boat has one water cooling system and one bilge drain installation.This systems powered by 2 water pumps driven by custom made (optional) battery pack or Li-po battery.
The boat also contains 3W navigation lightning system.The whole vehicle is a platform where you can make any upgrades you can wish.For instance, there’s a small volume in the bridge section that you can add a FPV camera or autopilot system.There’s another volume that you can carry cargo loads on the nose section and a huge battery compartment that boat carry 3x10.000mah 4S or 6S battery packs.
In the assembly manual, you will find detailed charts describing all parts to be used in the vehicle.Product purchase links that i used are also available in these charts.

Printing Material: PLA or PLA+
Layer Height: 0,25mm
Print Speed: 60mm/s (For most of the boat parts)
30mm/s (For PT4-A, PT4-D, PT4-E, PT5-A, PT7-F, PT7-E,
PT7-E(SM) PT8-D & PT8-(W1-2-3-4-5) Parts)
Infill: %100 (Solid)
No Support
Printer Size: 220x220x240(h)mm Minimum
Hull Lenght:1100mm
Hull Widht (Max): 200mm
Boat Height (With Antenna Tower):380mm