Creality K1/ K1 Max Aux Fan Silencer V2 - 360 degree

Hi Guys Im Retro D
And I designed this Silencer to Dampen the crazy noise from the Aux fan.

This Is the V2. Since the first one worked so well, I decided to allow more airflow and add a unique 360-degree sound-dampening pattern that seems to work just as well, even with the increased airflow Added.

Not only that, I Added Multiple designs to allow you to customize your rig how you see fit.

The New V2 also allows you to Use it on a second fan without having to mirror the silencer since it lets air in through the unique 360 intake design.

Even at 100%, it's quieter than my Ender 3 S1 pro. Which I barely Hear after Attaching my Pixel - Sprite cooling system.

Super surprised and happy with how well it works
I designed it to take air from the back and bottom of the case to reduce the noise at much as possible as the noise is redirected and dispersed without a loss in Airflow

Some of the Main differences to the normal grill models you find are as follows:

-Small and lightweight
-Easy to print,
-Just like all my Designs, you don't need Supports
-Dampens the sound Significantly
- Triple inlet Sides
-No reduction in Airflow
-No Screws needed (Uses Printable Pins)
-Easy to install
- Multiple Retro Designs and a Plain one for a simplistic style or as a canvas to add your own picture on the front.
-Can mix and match the Silencer with the pins for a cool effect.
-New 360-degree sound-dampening design.

Disclaimer:
Please don't think this will make your printer run completely silent. That is impossible. This is for lowering the frequency to make it more pleasing. Also, if you have the door and lid of the printer open, you can't expect it to be quiet. Let's be realistic here.
Most of the noise from the K1 and K1 max comes from the Hotend Fan anyway.

So lower the speed of your hot-end fan and up the speed of your aux with this silencer. will give you a more pleasing sound.

Please Note:
-I cannot be held responsible for your Printer not being calibrated, And the part not fitting. They have already been printed by many and fit great.

-Make sure you calibrate your printer before printing.
The Pins are meant to be tight so that they can hold the silencer in place without needing screws. Of course, you can still use screws if needed.

-Please refer to the images for the orientation you need to print it in.

Enjoy!

Print with Petg or any other filament that can handle being in the heated enclosure.

Flip so the fan hole is facing up and no supports needed