Hanger for surf / kite / wake / funboard / diving wetsuits

Tired of plastic hangers breaking or twisting under the weight of my wet suit, I designed a super-strong 3D-printed hanger specifically for drying them. Designed to be printed on small DIY machines, it can be assembled without the need for tools or glue. All you'll need is a piece of rope with the right diameter (5-7mm) and ideally a "lace clip" (I don't know the technical term) stitched onto an old backpack.

The other advantage with this hanger is that, with its rope hook, you can attach it just about anywhere and in any direction.

As always, if you like my work, tips, comments and likes are appreciated!

Happy printing and see you soon, Alex

Nothing in particular, except that you need at least 3 walls and 3 top/bottom surfaces to ensure sufficient strength (for this design, the fill ratio is of little importance). If your printer's platen doesn't adhere well, use an adhesion skirt to prevent wrapping (which can occur on large parts). Assemble by force with a mallet if necessary.